Quickstart

The Quick Start Guides provide simple step by step instructions on how to do an initial system setup for the EVAL-AD916X boards.

• ZCU102
  • Using Linux as software
    • Necessary files
    • Required Software
    • Required Hardware
    • Testing
      • Creating the setup
        • EVAL-AD9162-FMCZ/ZCU102
      • Boot messages
      • Useful commands for the serial terminal
    • IIO Oscilloscope

Supported carriers

The currently supported carrier is:

• ZCU102 on HPC0

Supported environments

Board	HDL	Linux software	no-OS software
ZCU102	Yes	Yes	No

Hardware setup

The EVAL-AD916X connects to the ZCU102 through the FMC connector (HPC0). The carrier setup requires a power supply, UART or Ethernet connections as needed. An RF spectrum analyzer can be used to verify and visualize the DAC output spectrum.

ZCU102 + EVAL-AD9164