Quick start
Warning
The AD-FMCADC5-EBZ is a legacy product and is no longer actively supported. This documentation is provided for reference only.
The Quick Start Guide provides step-by-step instructions on how to do an initial system setup for the AD-FMCADC5-EBZ boards.
Supported carriers
The AD-FMCADC5-EBZ is a double FMC wide board that needs a carrier with two fully populated FMC connectors. It connects to both the FMC1 and FMC2 connectors on the carrier.
Board |
AD-FMCADC5-EBZ |
|---|---|
FMC1 & FMC2 |
Supported environments
Board |
HDL |
Linux |
No-OS |
|---|---|---|---|
Yes |
Yes (up to 2021_r2) |
Yes |
Hardware setup
The carrier setup requires power, UART connection (115200 baud), and JTAG. Connect the AD-FMCADC5-EBZ FMC board to the FPGA carrier:
On the VC707: FMC1 & FMC2 connector
Connect USB JTAG (Micro USB) to your host PC
Connect UART cable to the USB UART port (115200 baud, 8N1)
Turn on the power switch on the FPGA board