Quick start
Warning
The AD-FMCADC7-EBZ is a legacy product and is no longer actively supported. This documentation is provided for reference only.
The Quick Start Guide provides step-by-step instructions on how to do an initial system setup for the AD-FMCADC7-EBZ board.
Supported carriers
The AD-FMCADC7-EBZ board connects to the HPC FMC connector on the carrier.
Board |
AD-FMCADC7-EBZ |
|---|---|
HPC |
Supported environments
Board |
HDL |
Linux |
No-OS |
|---|---|---|---|
Yes |
Yes (up to 2021_r2) |
Yes |
Hardware setup
The carrier setup requires power, UART connection (115200 baud, 8N1), Ethernet (for Linux), and JTAG (for No-OS) connections. The Zynq carrier programs the FPGA and boots Linux from the SD card.
Connect the AD-FMCADC7-EBZ FMC board to the FPGA carrier:
On the ZC706: HPC FMC connector
Connect USB JTAG (Micro USB) to your host PC
Connect UART cable to the USB UART port (115200 baud, 8N1)
Connect an Ethernet cable (required for Linux remote access)
Turn on the power switch on the FPGA board